Specifications

Monitor System Access and Performance
390
ProSAFE Gigabit Quad WAN SSL VPN Firewall SRX5308
Trace a Route
A traceroute lists all routers between the source (the VPN firewall) and the destination IP
address.
 To send a traceroute:
1. On the Diagnostics screen for IPv4, in the IP Address / Domain Name field of the Ping
or
Trace an IP Address section, enter the IP address or domain name that you want to
trace; on the Diagnostics screen for IPv6, in the Domain Name field, enter the domain
name that you want to trace (you cannot enter an IP address).
2. Do one of the following:
• Make sure that the Ping through VPN tunnel? check box is cleared, and select a
gateway from the Select Local Gateway drop-down list. (The Select VPN Policy
drop-down list is masked out.)
• Select the Ping through VPN tunnel? check box, and select a VPN policy from the
Select VPN Policy drop-down list. (The Select Local Gateway drop-down list is
masked out.)
3. Click the Traceroute button.
The results of the traceroute are displayed in a new screen.
4. To return to the Diagnostics screen, click Back
on the browser menu bar.
Look Up a DNS Address
A Domain Name Server (DNS) converts the Internet name (for example, www.netgear.com)
to an IP address. If you need the IP address of a web, FTP, mail, or other server on the
Internet, request a DNS lookup to find the IP address.
 To look up a DNS address:
1. In the Perform a DNS Lookup section of the screen, in the Internet Name field, enter a
domain name.
2. Click the Lookup button.
The results of the lookup action are displayed in a new screen.
To
return to the Diagnostics screen, click Back on the browser menu bar.
Display the Routing Tables
Displaying the internal routing table can assist NETGEAR technical support in diagnosing
routing problems.
 To display the routing table:
On the Diagnostics screen for IPv4, in the Router Options section of the screen, click the
Display button next to Display the IPv4 Routing T
able. The routing table is shown in the
Route Display pop-up screen.
On the Diagnostics screen for IPv6, in the Router Options section of the screen, click the
Display button next to Display the IPv6 Routing T
able. The routing table is shown in the
Route Display pop-up screen.