Specifications

Monitor System Access and Performance
384
ProSAFE Gigabit Quad WAN SSL VPN Firewall SRX5308
Click Disconnect to disconnect the connection; click Connect to establish the
connection.
IPv6 WAN Port Status
 To view the IPv6 status of the WAN port:
1. Select Network Configuration > WAN Settings > W
AN Setup.
2. In the upper right of the screen, select the IPv6 radio button. The WAN Setup screen
displays the IPv6 settings:
Figure 251.
3. In the Action column, click the Status button of the WAN interface for which you want to
display the Connection Status pop-up screen. (The following figure shows a dynamic IP
address configuration.)
DHCP Server DHCP only. The DHCP server that was automatically detected. This field displays
only if your ISP does not require a login and the IP address is acquired dynamically
from your ISP. You have configured these ISP settings on the WAN IPv4 ISP
Settings screen.
Note: For more information, see Let the VPN Firewall Automatically Detect and
Configure an IPv4 Internet Connection on page 31 and Manually Configure an IPv4
Internet Connection on page 34.
Lease Obtained DHCP only. The time when the DHCP lease was obtained.
Lease Duration DHCP only. The period that the DHCP lease remains in effect.
Table 98. Connection Status screen information for an IPv4 connection (continued)
Item Description