Specifications

Monitor System Access and Performance
377
ProSAFE Gigabit Quad WAN SSL VPN Firewall SRX5308
The following table explains the fields of the VLAN Status screen:
Tunnel Status Screen
The IPv6 Tunnel Status screen displays the status of all active 6to4 and ISATAP tunnels and
their IPv6 addresses.
 To view the status of the tunnels and IPv6 addresses:
Select Monitoring > Router Status > Tunnel Status.
The Tunnel Status screen displays:
Figure 240.
The IPv6 Tunnel Status table shows the following fields:
• Tunnel Name. The tunnel name for the 6to4 tunnel is always sit0-WAN1 (SIT stands for
simple Internet transition); the tunnel name for an ISA
TAP tunnel is isatapx-LAN, in which
x is an integer.
• IPv6 Address. The IPv6 address of the local tunnel endpoint.
Table 94. VLAN Status screen information
Item Description
Profile Name The unique name for the VLAN that you have assigned on the Add
VLAN Profile screen.
For information about
configuring VLANs,
see Configure a VLAN
Profile on page 88.
VLAN ID The identifier for the VLAN that you have assigned on the
Add
VLAN Profile screen.
MAC Address VLANs can have the same MAC address as the associated LAN
port or can be assigned a unique MAC address, depending on the
VLAN MAC settings that you have specified on the IPv4 LAN
Advanced screen (see Configure VLAN MAC Addresses and LAN
Advanced Settings on page 93).
Subnet IP The IP address and subnet mask that you have assigned on the
Add VLAN Profile screen.
DHCP Status The DHCP status for the VLAN, which can be either DHCP
Enabled or DHCP Disabled, depending on the DHCP configuration
that you have specified on the Add VLAN Profile screen.
Port Membership The ports that you have associated with the VLAN on the Add
VLAN Profile screen.