Specifications

Monitor System Access and Performance
363
ProSAFE Gigabit Quad WAN SSL VPN Firewall SRX5308
2. Enter the settings as described in the following table:
Table 90. Firewall Logs & E-mail screen settings
Setting Description
Log Options
Log Identifier Enter the name of the log identifier. The identifier is appended to log messages to identify
the device that sent the log messages. The default identifier is SRX5308.
Routing Logs
In the
Accepted Packets and Dropped Packets columns, select check boxes to specify which traffic is
logged:
• LAN to WAN
• LAN to DMZ
• DMZ to WAN
• WAN to LAN
• DMZ to LAN
• WAN to DMZ
System Logs Option
Select the check boxes to specify which system events are logged:
• Change of T
ime by NTP. Logs a message when the system time changes after a request from an
NTP server
.
• Login Attempts. Logs a message when a login is attempted. Both successful and failed login attempts
are logged.
• Secure Login
Attempts
. Logs a message when a secure login is attempted. Both successful and
failed secure login attempts are logged.
• Reboots. Logs a message when the VPN firewall has been rebooted through the web management
interface. (No message is logged when the factory default Reset button has been pressed.)
• All Unicast T
raffic
. All incoming unicast packets are logged.
• All Broadcast/Multicast Traffic
. All incoming broadcast and multicast packets are logged.
• WAN Status. W
AN link status–related events are logged.
• Resolved DNS Names. All resolved DNS names are logged.
• VPN. All VPN negotiation messages are logged.
Other Event Logs
Source MAC
Filter
Select this check box to log packets from MAC addresses that match the source MAC
address filter settings.
Session Limit Select this check box to log packets that are dropped because the session limit has been
exceeded.
Bandwidth
Limit
Select this check box to log packets that are dropped because the bandwidth limit has been
exceeded.