Specifications

Monitor System Access and Performance
356
ProSAFE Gigabit Quad WAN SSL VPN Firewall SRX5308
Configure and Enable the WAN Traffic Meter
If your ISP charges by traffic volume over a given period, or if you want to study traffic types
over a period, you can activate the traffic meter for IPV4 traffic on a WAN port.
 To configure and monitor traffic limits on a WAN port:
1. Select Monitoring > Traffic Meter. The
WAN Traffic Meter tabs display, with the
WAN1 Traffic Meter screen in view.
The Internet Traffic Statistics section in the lower part of the screen displays statistics on
Internet traffic through the W
AN port. If you have not enabled the traffic meter, these
statistics are not available.
Figure 227.
2. Enter the settings for the WAN1 interface as described in the following table. If you want to
configure the settings for another WAN interface, first select the associated tab for that
interface.