Specifications

Network and System Management
354
ProSAFE Gigabit Quad WAN SSL VPN Firewall SRX5308
3. Click Apply to save your settings.
Note: If you select the default NTP servers or if you enter a custom server
FQDN, the VPN firewall determines the IP address of the NTP
server by performing a DNS lookup. Before the VPN firewall can
perform this lookup, you need to configure a DNS server address on
the WAN IPv4 ISP Settings screen (see Manually Configure an IPv4
Internet Connection on page 34.)
NTP Servers (default or
custom)
Select one of the following radio buttons to specify the NTP servers:
• Use Default NTP Servers. The VPN
firewall regularly updates its RTC by
contacting a default NETGEAR NTP server on the Internet.
• Use Custom NTP Servers. The
VPN
firewall regularly updates its RTC by
contacting one of two custom NTP servers (primary and backup), both of
which you need to specify in the fields that become available with this
selection.
Note: If you select the Use Custom NTP Servers option but leave either the
Server 1 or Server 2 field blank, both fields are set to the default NETGEAR
NTP servers.
Note: A list of public NTP servers is available at
http://support.ntp.org/bin/view/Servers/WebHome.
NTP Servers (custom) Server 1 Name / IP Address Enter the IP address or host name of the primary
NTP server.
Server 2 Name / IP Address Enter the IP address or host name of the backup
NTP server.
Table 87. Time Zone screen settings (continued)
Setting Description