Specifications

Network and System Management
352
ProSAFE Gigabit Quad WAN SSL VPN Firewall SRX5308
4. Select Monitoring. The Router Status screen displays, showing the selected firmware
version in the System Info section of the screen.
Configure Date and Time Service
Configure date, time, and NTP server designations on the System Date & Time screen.
Network Time Protocol (NTP) is a protocol that is used to synchronize computer clock times
in a network of computers. Setting the correct system time and time zone ensures that the
date and time recorded in the VPN firewall logs and reports are accurate.
 To set time, date, and NTP servers:
1. Select Administration > Time Zone. The T
ime Zone screen displays:
Figure 226.
The bottom of the screen display the current weekday, date, time, time zone, and year (in
the example in the previous figure: Current Time: Wednesday, June 20, 2012, 16:48:47
(GMT -0800).
2. Enter the settings as described in the following table:
Table 87. Time Zone screen settings
Setting Description
Date/Time From the drop-down list, select the local time zone in which the VPN firewall
operates. The correct time zone is required in order for scheduling to work
correctly
.
Automatically Adjust for
Daylight Savings Time
If daylight saving time is supported in your region, select the Automatically
Adjust for Daylight Savings Time check box. By default, the check box is
disabled.