Specifications

Network and System Management
347
ProSAFE Gigabit Quad WAN SSL VPN Firewall SRX5308
2. Enter the settings as described in the following table:
3. Click Apply to save your changes.
Manage the Configuration File
The configuration settings of the VPN firewall are stored in a configuration file on the VPN
firewall. This file can be saved (backed up) to a computer, retrieved (restored) from the
computer, cleared to factory default settings, or upgraded to a new version.
Once the VPN firewall is installed and works correctly, make a backup of the configuration file
to a computer. If necessary
, you can later restore the VPN firewall settings from this file.
The Backup & Restore Settings screen lets you:
• Back up and save a copy of the current settings (see Back Up Settings on page 348)
• Restore saved settings from the backed-up file (see Restore Settings on page 349)
• Revert to the factory default settings (see Revert to Factory Default Settings on
page 349)
• Upgrade the firmware (see Upgrade the Firmware on page 350)
• Reboot the VPN firewall with a dif
ferent firmware version (see Select the Firmware and
Reboot the VPN Firewall
on page 351).
To display the Settings Backup and Firmware Upgrade screen, select Administration >
Settings Backup & Upgrade.
Table 86. SNMP SysConfiguration screen settings
Setting Description
SysContact Enter the SNMP system contact information that is available to the SNMP manager.
This setting is optional.
SysLocation Enter the physical location of the VPN firewall.
This setting is optional.
SysName Enter the name of the VPN firewall for SNMP identification purposes. The default
name is SRX5308.