Specifications

Network and System Management
346
ProSAFE Gigabit Quad WAN SSL VPN Firewall SRX5308
3. Click Apply to save your changes.
 To configure the SNMP system information:
1. On the SNMP screen (see Figure 221 on page 343), click the SNMP System Info option
arrow in the upper right of the screen. The SNMP SysConfiguration screen displays:
Figure 224.
Security Level From the drop-down list, select the security level for communication between
the SNMPv3 user and the SNMP agent that collects the MIB objects from the
VPN firewall:
• NoAuthNoPriv. Both authentication and privacy are disabled.
This is the
default setting.
• AuthNoPriv.
Authentication is enabled but privacy is disabled. Make a
selection from the
Authentication Algorithm drop-down list and enter an
authentication password.
• AuthPriv.
Authentication and privacy are enabled. Make a selection from
the Authentication Algorithm
drop-down list and enter an authentication
password. In addition, make a selection from the Privacy Algorithm
drop-down list and enter a privacy password.
Authentication Algorithm From the drop-down list, select the protocol for authenticating an SNMPv3 user:
• MD5. Message Digest 5.
This is a hash algorithm that produces a 128-bit
digest.
• SHA1. Secure Hash
Algorithm 1. This is a hash algorithm that produces a
160-bit digest.
Authentication Password The authentication password that an SNMPv3 user needs to enter to be granted
access to the SNMP agent that collects the MIB objects from the VPN firewall.
Privacy Algorithm
From the drop-down list, select the encryption method for the communication
between an SNMPv3 user and the SNMP agent that collects the MIB objects
from the VPN firewall:
• DES. Data Encryption Standard.
• AES. Advanced
Encryption
Standard.
Privacy Password The privacy password that an SNMPv3 user needs to enter to allow decryption
of the MIB objects that the SNMP agent collects from the VPN firewall.
Table 85. Edit User screen settings for SNMPv3 users (continued)
Setting Description