Specifications

IPv4 and IPv6 Internet and WAN Settings
33
ProSAFE Gigabit Quad WAN SSL VPN Firewall SRX5308
• If the autodetect process does not find a connection, you are prompted either to
check the physical connection between your VPN firewall and the cable, DSL line, or
satellite or wireless Internet dish, or to check your VPN firewall’s MAC address. For
more information, see Configure Advanced WAN Options and Other Tasks on
page 71 and Troubleshoot the ISP Connection on page 396.
4. Verify the connection:
a. Select
Network Configuration > WAN Settings > W
AN Setup. The WAN Setup
screen displays the IPv4 settings (see Figure 11 on page 31).
b. In the Action column, click the Status
button of the WAN interface for which you
want to display the Connection Status pop-up screen. (The following figure shows a
static IP address configuration.)
Table 2. IPv4 Internet connection methods
Connection Method Manual Data Input Required
DHCP (Dynamic IP) No manual data input is required.
PPPoE The following fields are required:
•
Login
• Password
• Account Name
• Domain Name
PPTP The following fields are required:
• Login
• Password
• Account Name
• Domain Name
• My IP Address
• Server IP Address
Fixed (Static) IP The following fields are required:
• IP Address
• IP Subnet Mask
• Gateway IP Address
• Primary DNS Server
• Secondary DNS Server