Specifications

Manage Users, Authentication, and VPN Certificates
316
ProSAFE Gigabit Quad WAN SSL VPN Firewall SRX5308
Figure 209.
5. In the Defined Addresses Status section of the screen, select one of the following radio
buttons:
• Deny Login from Defined
Addresses
. Deny logging in from the IP addresses in the
Defined Addresses table.
• Allow Login only from Defined Addresses.
Allow logging in from the IP addresses
in the Defined Addresses table.
6. Click Apply to save your settings.
7. In the
Add Defined Addresses section of the screen, add an address to the Defined
Addresses table by entering the settings as described in the following table:
8. Click the Add
table button. The address is added to the Defined
Addresses table.
9. Repeat Step 7 and Step 8 for any other addresses that you want to add to the Defined
Addresses table.
Table 80. Defined addresses settings for IPv6
Setting Description
Source Address Type Select the type of address from the drop-down list:
• IP Address. A
single
IPv6 address.
• IP Network. A subnet of IPv6 addresses.
You need to enter a prefix length in
the Prefix Length field.
Network Address / IP
Address
Depending on your selection from the Source Address
Type drop-down list, enter
the IP address or the network address.
Prefix Length For a network address, enter the prefix length (0–64).
Note: By default, a single IPv6 address is assigned a prefix length of 64.