Specifications

Manage Users, Authentication, and VPN Certificates
314
ProSAFE Gigabit Quad WAN SSL VPN Firewall SRX5308
Note: For security reasons, the Deny Login from WAN Interface check box
is selected by default for guests and administrators. The Disable
Login check box is disabled (masked out) for administrators.
4. Click Apply to save your settings.
Configure Login Restrictions Based on IPv4 Addresses
 To restrict logging in based on IPv4 addresses:
1. Select Users > Users. The Users screen displays (see Figure 205
on page 311).
2. In the Action column of the List of Users table, click the Policies
table button for the user for
which you want to set login policies. The policies submenu tabs display, with the Login
Policies screen in view.
3. Click the By Source IP Address
submenu tab. In the upper right of the screen, the IPv4
radio button is selected by default. The By Source IP Address screen displays the IPv4
settings. (The following figure shows an IP address in the Defined Addresses table as an
example.)
Figure 208.
4. In the Defined Addresses Status section of the screen, select one of the following radio
buttons:
• Deny Login from Defined
Addresses
. Deny logging in from the IP addresses in the
Defined Addresses table.
• Allow Login only from Defined Addresses.
Allow logging in from the IP addresses
in the Defined Addresses table.
5. Click Apply to save your settings.