Specifications

Manage Users, Authentication, and VPN Certificates
312
ProSAFE Gigabit Quad WAN SSL VPN Firewall SRX5308
Figure 206.
3. Enter the settings as described in the following table:
4. Click Apply to save your settings. The user is added to the List of Users table.
Table 78. Add Users screen settings
Setting Description
User Name A descriptive (alphanumeric) name of the user for identification and management
purposes.
User T
ype From the drop-down list, select one of the predefined user types that determines the
access credentials:
• SSL VPN User. A user who can log in only to the SSL VPN portal.
• Administrator
. A user who has full access and the capacity to change the VPN
firewall configuration (that is, read/write access).
• Guest (readonly)
.
A user who can only view the VPN firewall configuration (that
is, read-only access).
• IPSEC VPN User
.
A user who can make an IPSec VPN connection only through
a NETGEAR ProSafe VPN Client, and only when the XAUTH feature is enabled
(see Configure Extended
Authentication (XAUTH) on page 245).
• L2TP User.
A user who can connect over an L2TP connection to an L2TP client
that is located behind the VPN firewall.
• PPTP User.
A user who can connect over a PPTP connection to a PPTP client
that is located behind the VPN firewall.
Select Group
The drop-down list shows the groups that are listed on the Group screen. From the
drop-down list, select the group to which the user is assigned. For information about
how to configure groups, see Configure Groups on page 307.
Note: The user is assigned to the domain that is associated with the selected group.
Password
The password that the user needs to enter to gain access to the VPN firewall.
Confirm Password
This field needs to be identical to the password that you entered in the Password field.
Idle Timeout The period after which an idle user is automatically logged out of the web management
interface. The default idle time-out period is 5 minutes.