Specifications

Manage Users, Authentication, and VPN Certificates
308
ProSAFE Gigabit Quad WAN SSL VPN Firewall SRX5308
IMPORTANT:
When you create a domain on the Domains screen (see the
previous section), a group with the same name as the new domain
is created automatically. You cannot delete such a group. However,
when you delete the domain with which it is associated, the group
is deleted automatically.
Note: IPSec VPN, L2TP, and PPTP users do not belong to a domain and
are not assigned to a group.
Note: Groups that are defined on the Groups screen are used for setting
SSL VPN policies. These groups should not be confused with LAN
groups that are defined on the IPv4 LAN Groups screen and that are
used to simplify firewall policies. For information about LAN groups,
see Manage IPv4 Groups and Hosts (IPv4 LAN Groups) on page 96.
Create Groups
 To create a VPN group:
1. Select Users > Groups. The Groups screen displays. (The following figure shows the
VPN firewall’
s default group—geardomain—and, as an example, several other groups in
the List of Groups table.)
Figure 203.
The List of Groups table displays the VPN groups with the following fields:
• Check box. Allows you to select the group in the table.
• Name.
The name of the group. The name of the default group (geardomain) that is
assigned to the default domain (also geardomain) is appended by an asterisk.