Specifications

Virtual Private Networking Using IPSec and L2TP Connections
257
ProSAFE Gigabit Quad WAN SSL VPN Firewall SRX5308
9. Click Apply to save your settings. The IKE policy is added to the List of IKE Policies table.
Configure the ProSafe VPN Client for Mode Config
Operation
When the Mode Config feature is enabled, the following information is negotiated between
the VPN client and the VPN firewall during the authentication phase:
• Virtual IP address of the VPN client
• DNS server address (optional)
• WINS server address (optional)
The virtual IP address that is issued by the VPN firewall is displayed in the VPN Client
Address field on the VPN client’
s IPSec pane.
Extended Authentication
XAUTH Configuration
Note: For more
information about
XAUTH and its
authentication
modes, see Configure
XAUTH for VPN
Clients on page 246.
Select one of the following radio buttons to specify whether Extended
Authentication (XAUTH) is enabled, and, if enabled, which device is used to verify
user account information:
• None. XAUTH is disabled.
This the default setting.
• Edge Device
. The VPN firewall functions as a VPN concentrator on which one
or more gateway tunnels terminate.
The authentication modes that are
available for this configuration are User Database, RADIUS PAP, and RADIUS
CHAP.
• IPSec Host. The VPN firewall functions as a VPN client of the remote
gateway
. In this configuration, the VPN firewall is authenticated by a remote
gateway with a user name and password combination.
Authentication
T
ype
For an Edge Device configuration, from the drop-down list,
select one of the following authentication types:
• User Database
. XAUTH occurs through the VPN firewall’
s
user database.
You can add users on the Add User screen
(see User Database Configuration on page 247).
• Radius P
AP. XAUTH occurs through RADIUS Password
Authentication Protocol (P
AP). The local user database is
first checked. If the user account is not present in the local
user database, the VPN firewall connects to a RADIUS
server. For more information, see RADIUS Client and
Server Configuration on page 247.
• Radius CHAP. XAUTH occurs through RADIUS
Challenge Handshake
Authentication Protocol (CHAP).
For more information, see RADIUS Client and Server
Configuration on page 247.
Username The user name for XAUTH.
Password The password for XAUTH.
Table 60. Add IKE Policy screen settings for a Mode Config configuration (continued)
Setting Description