Specifications

Virtual Private Networking Using IPSec and L2TP Connections
230
ProSAFE Gigabit Quad WAN SSL VPN Firewall SRX5308
The Active IPSec SA(s) table lists each active connection with the information that is
described in the following table. The default poll interval is 10 seconds. To change the poll
interval period, enter a new value in the Poll Interval field, and click the Set Interval button.
To stop polling, click the Stop button.
View the VPN Firewall IPSec VPN Log
 To display the IPSec VPN log:
Select Monitoring > VPN Logs > IPSec VPN Logs. The IPSec VPN Logs screen displays:
Figure 157.
Table 52. IPSec VPN Connection Status screen information
Item Description
Policy Name The name of the VPN policy that is associated with this SA.
Endpoint The IP address on the remote VPN endpoint.
Tx (KB) The amount of data that is transmitted over this SA.
Tx (Packets)
The number of IP packets that are transmitted over this SA.
State The status of the SA. Phase 1 is the authentication phase, and Phase 2 is key exchange
phase. If there is no connection, the status is IPSec SA Not Established.
Action Click the Connect table button to build the connection, or click the Disconnect table
button to terminate the connection.