Specifications

Virtual Private Networking Using IPSec and L2TP Connections
209
ProSAFE Gigabit Quad WAN SSL VPN Firewall SRX5308
To view the wizard default settings, click the VPN Wizard default values option arrow in
the upper right of the screen. A pop-up screen displays (see the following figure),
showing the wizard default values. The default values are the same for IPv4 and IPv6.
Figure 132.
3. Complete the settings as described in the following table:
Table 45. IPSec VPN Wizard settings for an IPv6 gateway-to-gateway tunnel
Setting Description
About VPN Wizard
This VPN tunnel will connect
to the following peers
Select the Gateway radio button. The local W
AN port’s IP address or
Internet name displays in the End Point Information section of the screen.
Connection Name and Remote IP Type
What is the new Connection
Name?
Enter a descriptive name for the connection.
This name is used to help you
to manage the VPN settings; the name is not supplied to the remote VPN
endpoint.