Specifications

Firewall Protection
195
ProSAFE Gigabit Quad WAN SSL VPN Firewall SRX5308
4. Click the Set Interval button. Wait for the confirmation that the operation has succeeded
before you close the window.
IPv6/MAC Bindings
 To set up a binding between a MAC address and an IPv6 address:
1. Select Security > Address Filter > IP/MAC Binding
.
2. In the upper right of the screen, select the IPv6 radio button. The IP/MAC Binding screen
displays the IPv6 settings. (The following figure shows a binding in the IP/MAC Binding table
as an example.)
Figure 118.
3. In the Email IP/MAC Violations section of the screen, specify if you want to enable email
logs for IP/MAC binding violations. (You have to do this only once.) Select one of the
following radio buttons:
• Ye
s. IP/MAC binding violations are emailed. Click the
Firewall Logs & E-mail page
link to ensure that emailing of logs is enabled on the Firewall Logs & E-mail screen
(see Configure Logging, Alerts, and Event Notifications on page 362).
• No. IP/MAC binding violations are not emailed.
4. Click Apply to save your changes.
5. In the IP/MAC Bindings sections of the screen, enter the settings as described in the
following table:
Table 41. IP/MAC Binding screen settings for IPv6
Setting Description
Name A descriptive name of the binding for identification and management purposes.
MAC Address
The MAC address of the computer or device that is bound to the IP address.