Specifications

Firewall Protection
167
ProSAFE Gigabit Quad WAN SSL VPN Firewall SRX5308
this address on the WAN2 Secondary Addresses screen (see Configure Secondary WAN
Addresses on page 47) before you can select it from the WAN Destination IP Address
drop-down list.
8. Click Apply to save your settings. The rule is now added to the Inbound Services table of
the LAN W
AN Rules screen.
To test the connection from a computer on the Internet, type http://<IP_address>, in which
<IP_address> is the public IP address that you have mapped to your web server in Step 6.
You should see the home page of your web server.
IPv4 LAN WAN or IPv4 DMZ WAN Inbound Rule: Specifying an Exposed
Host
Specifying an exposed host allows you to set up a computer or server that is available to
anyone on the Internet for services that you have not yet defined.
WARNING:
Do not set up an exposed host from a remote connection because
you will likely lock yourself out from the VPN firewall.
 To expose one of the computers on your LAN or DMZ as this host:
1. Create an inbound rule that allows all protocols.
2. Place the rule below all other inbound rules.
See an example in the following figure.
Figure 96.
1. Select Any and Allow Always (or Allow by Schedule).
2. Place the rule below all other inbound rules.