Specifications

Firewall Protection
165
ProSAFE Gigabit Quad WAN SSL VPN Firewall SRX5308
Figure 94.
IPv4 LAN WAN or IPv4 DMZ WAN Inbound Rule: Set Up One-to-One NAT
Mapping
In this example, multi-NAT is configured to support multiple public IP addresses on one WAN
interface. An inbound rule configures the VPN firewall to host an additional public IP address
and associate this address with a web server on the LAN.
The following addressing scheme is used to illustrate this procedure:
• NETGEAR VPN firewall:
- WAN IP address. 10.1.0.118
- LAN IP address subnet. 192.168.1.1 with subnet 255.255.255.0
- DMZ IP address subnet. 176.16.10.1 with subnet 255.255.255.0
• W
eb server computer on the VPN firewall’s LAN:
- LAN IP address. 192.168.1.2
- DMZ IP address. 176.16.10.2
- Access to the web server is through the public IP address. 10.168.50.1