Specifications

Firewall Protection
162
ProSAFE Gigabit Quad WAN SSL VPN Firewall SRX5308
Create LAN DMZ Inbound Service Rules
The Inbound Services table lists all existing rules for inbound traffic. If you have not defined
any rules, no rules are listed. By default, all inbound traffic (from the LAN to the DMZ) is
blocked.
IPv4 LAN DMZ Inbound Service Rules
 To create an IPv4 LAN DMZ inbound rule:
1. In the upper right of the LAN DMZ Rules screen, the IPv4 radio button is selected by default.
The screen displays the IPv4 settings (see Figure 87 on page 158).
Click the Add table button under the Inbound Services table. The
Add LAN DMZ Inbound
Service screen for IPv4 displays:
Figure 91.
2. Enter the settings as described in Table 34 on page 141. In addition to selections from the
Service, Action, and Log drop-down lists, you need to make selections from the following
drop-down lists:
• LAN Users
• DMZ Users
Unless your selection from the Action drop-down list is BLOCK always, you also need to
make a selection from the following drop-down list:
• Select Schedule
3. Click Apply to save your changes. The new rule is now added to the Inbound Services
table.