Specifications

Firewall Protection
159
ProSAFE Gigabit Quad WAN SSL VPN Firewall SRX5308
To change an existing outbound or inbound service rule, in the Action column to the right of
the rule, click one of the following table buttons:
• Up. Moves the rule up one position in the table rank.
• Down. Moves the rule down one position in the table rank.
• Edit. Lets you change the definition of an existing rule. Depending on your selection, one
of the following screens displays:
- Edit LAN DMZ Outbound Service screen for IPv4 (identical to Figure 89 on page 160)
- Edit LAN DMZ Inbound Service screen for IPv4 (identical to Figure 91 on page 162)
 To access the LAN DMZ Rules screen for IPv6 or to change existing IPv6 rules:
1. Select Security > Firewall > LAN DMZ Rules. The Firewall
submenu tabs display with
the LAN DMZ Rules screen for IPv4 in view.
2. In the upper right of the screen, select the IPv6 radio button. The LAN DMZ Rules screen
displays the IPv6 settings. (The following figure contains examples.)
Figure 88.
To change an existing outbound or inbound service rule, in the Action column to the right of
the rule, click one of the following table buttons:
• Up. Moves the rule up one position in the table rank.
• Down. Moves the rule down one position in the table rank.
• Edit. Lets you change the definition of an existing rule. Depending on your selection, one
of the following screens displays:
- Edit LAN DMZ Outbound Service screen for IPv6 (identical to Figure 90 on page 161)
- Edit LAN DMZ Inbound Service screen for IPv6 (identical to Figure 92 on page 163)
 To enable, disable, or delete one or more IPv4 or IPv6 rules:
1. Select the check box to the left of each rule that you want to enable, disable, or delete,
or click the Select All table button to select all rules.