Specifications

Firewall Protection
157
ProSAFE Gigabit Quad WAN SSL VPN Firewall SRX5308
2. Enter the settings as described in Table 34 on page 141. In addition to selections from the
Service, Action, and Log drop-down lists, you need to make selections from the following
drop-down lists:
• W
AN Destination IP Address
• DMZ Users (This drop-down list is available only when the WAN mode is Classical
Routing. When the W
AN mode is NAT, your network presents only one IP address to
the Internet.)
• W
AN Users
Unless your selection from the Action drop-down list is BLOCK always, you also need to
make selections from the
following drop-down lists:
• Select Schedule
• Send to DMZ Server
The following configurations are optional:
• T
ranslate to Port Number
• QoS Profile
3. Click Apply to save your changes.
The new rule is now added to the Inbound Services
table.
IPv6 DMZ WAN Inbound Service Rules
 To create an IPv6 DMZ WAN inbound rule:
1. In the upper right of the DMZ WAN Rules screen, select the IPv6 radio button.
The screen
displays the IPv6 settings (see Figure 82 on page 153).
2. Click the Add table button under the Inbound Services table. The
Add DMZ WAN Inbound
Service screen for IPv6 displays:
Figure 86.
3. Enter the settings as described in Table 34 on page 141. In addition to selections from the
Service, Action, and Log drop-down lists, you need to make selections from the following
drop-down lists:
• DMZ Users
• WAN Users