Specifications

Firewall Protection
153
ProSAFE Gigabit Quad WAN SSL VPN Firewall SRX5308
To change an existing outbound or inbound service rule, in the Action column to the right of
the rule, click one of the following table buttons:
• Up. Moves the rule up one position in the table rank.
• Down. Moves the rule down one position in the table rank.
• Edit. Lets you change the definition of an existing rule. Depending on your selection, one
of the following screens displays:
- Edit DMZ W
AN Outbound Service screen for IPv4 (identical to
Figure 83 on
page 154)
- Edit DMZ WAN Inbound Service screen for IPv4 (identical to
Figure 85 on page 156)
 To access the DMZ WAN Rules screen for IPv6 or to change existing IPv6 rules:
1. Select Security > Firewall > DMZ WAN Rules
. The Firewall submenu tabs display with
the DMZ WAN Rules screen for IPv4 in view.
2. In the upper right of the screen, select the IPv6 radio button. The DMZ W
AN Rules screen
displays the IPv6 settings. (The following figure contains examples.)
Figure 82.
To change an existing outbound or inbound service rule, in the Action column to the right of
the rule, click one of the following table buttons:
• Up. Moves the rule up one position in the table rank.
• Down. Moves the rule down one position in the table rank.
• Edit. Lets you change the definition of an existing rule. Depending on your selection, one
of the following screens displays:
- Edit DMZ W
AN Outbound Service screen for IPv6 (identical to
Figure 84 on
page 155)
- Edit DMZ WAN Inbound Service screen for IPv6 (identical to
Figure 86 on page 157)