Specifications

Firewall Protection
151
ProSAFE Gigabit Quad WAN SSL VPN Firewall SRX5308
The following configurations are optional:
• Translate to Port Number
• QoS Profile
• Bandwidth Profile
3. Click Apply to save your changes.
The new rule is now added to the Inbound Services
table.
IPv6 LAN WAN Inbound Rules
 To create an IPv6 LAN WAN inbound rule:
1. In the upper right of the LAN WAN Rules screen, select the IPv6 radio button.
The screen
displays the IPv6 settings (see Figure 76 on page 146).
2. Click the Add table button under the Inbound Services table. The
Add LAN WAN Inbound
Service screen for IPv6 displays:
Figure 80.
3. Enter the settings as described in Table 34 on page 141. In addition to selections from the
Service, Action, and Log drop-down lists, you need to make selections from the following
drop-down lists:
• LAN Users
• WAN Users
Unless your selection from the Action drop-down list is BLOCK always, you also need to
make a selection from the following drop-down list:
• Select Schedule
4. Click Apply to save your changes. The new rule is now added to the Inbound Services
table.