Specifications

Firewall Protection
149
ProSAFE Gigabit Quad WAN SSL VPN Firewall SRX5308
Figure 78.
3. Enter the settings as described in Table 33 on page 137. In addition to selections from the
Service, Action, and Log drop-down lists, you need to make selections from the following
drop-down lists:
• LAN Users
• WAN Users
Unless your selection from the Action drop-down list is BLOCK always, you also need to
make a selection from the following drop-down lists:
• Select Schedule
• QoS Priority
4. Click Apply to save your changes.
The new rule is now added to the Outbound Services
table.
Create LAN WAN Inbound Service Rules
The Inbound Services table lists all existing rules for inbound traffic. If you have not defined
any rules, no rules are listed. By default, all inbound traffic (from the Internet to the LAN) is
blocked. Remember that allowing inbound services opens potential security holes in your
firewall. Enable only those ports that are necessary for your network.
WARNING:
Make sure that you understand the consequences of a LAN WAN
inbound rule before you apply the rule. Incorrect configuration
might cause serious connection problems. If you are configuring
the VPN firewall from a remote connection, you might be locked
out.