Specifications

Firewall Protection
148
ProSAFE Gigabit Quad WAN SSL VPN Firewall SRX5308
Figure 77.
2. Enter the settings as described in Table 33 on page 137. In addition to selections from the
Service, Action, and Log drop-down lists, you need to make selections from the following
drop-down lists:
• LAN Users
• WAN Users
Unless your selection from the Action drop-down list is BLOCK always, you also need to
make selections from the following drop-down lists:
• Select Schedule
• QoS Profile
• Bandwidth Profile
• NA
T IP (This drop-down list is available only when the WAN mode is NAT.)
3. Click Apply to save your changes. The new rule is now added to the Outbound Services
table.
IPv6 LAN WAN Outbound Rules
 To create an IPv6 LAN WAN outbound rule:
1. In the upper right of the LAN WAN Rules screen, select the IPv6
radio button. The screen
displays the IPv6 settings (see Figure 76 on page 146).
2. Click the Add table button under the Outbound Services table. The
Add LAN WAN
Outbound Service screen for IPv6 displays: