Specifications

LAN Configuration
132
ProSAFE Gigabit Quad WAN SSL VPN Firewall SRX5308
Manage Static IPv6 Routing
NETGEAR’s implementation of IPv6 does not support RIP next generation (RIPng) to
exchange routing information, and dynamic changes to IPv6 routes are not possible. To
enable routers to exchange information over a static IPv6 route, you need to manually
configure the static route information on each router.
 To add an IPv6 static route to the Static Route table:
1. Select Network Configuration > Routing.
2. In the upper right of the screen, select the IPv6 radio button.
The Static Routing screen
displays the IPv6 settings:
Figure 72.
3. Click the Add table button under the Static Routes table. The Add IPv6 Static Routing
screen displays:
Figure 73.