Specifications

Introduction
13
ProSAFE Gigabit Quad WAN SSL VPN Firewall SRX5308
The VPN firewall provides the following key features and capabilities:
Four 10/100/1000 Mbps Gigabit Ethernet WAN ports for load balancing and failover
protection of your Internet connection, providing increased data rate and increased
system reliability.
Built-in four-port 10/100/1000 Mbps Gigabit Ethernet LAN switch for fast data transfer
between local network resources and support for up to 200,000 internal or external
connections.
Both IPv4 and IPv6 support
Advanced IPSec VPN and SSL VPN support with support for up to 125 concurrent IPSec
VPN tunnels and up to 50 concurrent SSL VPN tunnels.
Bundled with a single-user license of the NETGEAR ProSafe VPN Client software
(VPN01L).
L2TP tunnel and PPTP tunnel support
Advanced stateful packet inspection (SPI) firewall with multi-NA
T support.
Quality of Service (QoS) and SIP 2.0 support for traffic prioritization, voice, and
multimedia.
Extensive protocol support.
One console port for local management.
SNMP support with SNMPv1, SNMPv2c, and SNMPv3, and management optimized for
the NETGEAR ProSafe Network Management Software (NMS200) over a LAN
connection.
Front panel LEDs for easy monitoring of status and activity
.
Flash memory for firmware upgrade.
Internal universal switching power supply
.
Rack-mounting kit for 1U rackmounting.
Quad-WAN Ports for Increased Reliability and Load
Balancing
The VPN firewall provides four broadband WAN ports. These WAN ports allow you to
connect additional broadband Internet lines that can be configured to:
Load-balance outbound traffic between up to four lines for maximum bandwidth
efficiency.
Provide backup and rollover if one line is inoperable, ensuring that you are never
disconnected.
See Appendix B, Network Planning for Multiple WAN Ports for the planning factors to
consider when implementing the following capabilities with multiple WAN port gateways:
Single or multiple exposed hosts.
V
irtual private networks (VPNs).