Specifications

LAN Configuration
107
ProSAFE Gigabit Quad WAN SSL VPN Firewall SRX5308
Figure 59.
2. Enter the settings as described in the following table:
3. Click Apply to save your changes and add the new IPv6 address pool to the List of IPv6
Address Pools table on the LAN Setup screen for IPv6.
 To edit an IPv6 LAN address pool:
1. On the LAN Setup screen for IPv6 (see Figure 58 on page 104), click the Edit button in
the Action column for the address pool that you want to modify. The LAN IPv6 Config
screen displays.
2. Modify the settings as described in the previous table.
3. Click Apply to save your settings.
 To delete one or more IPv6 LAN address pools:
1. On the LAN Setup screen for IPv6 (see Figure 58 on page 104), select the check box to
the left of each address pool that you want to delete, or click the Select All table button
to select all address pools.
2. Click the Delete table button.
IPv6 LAN Prefixes for Prefix Delegation
If you configure a stateless DHCPv6 server for the LAN and select the Prefix Delegation
check box (both on the ISP IPv6 WAN Settings screen and on the LAN Setup screen for
IPv6, a prefix delegation pool is automatically added to the List of Prefixes for Prefix
Delegation table. You can also manually add prefixes to the List of Prefixes for Prefix
Table 19. LAN IPv6 Config screen settings
Setting Description
Start IPv6 Address Enter the start IP address. This address specifies the first of the contiguous
addresses in the IP address pool. Any new DHCPv6 client joining the LAN is
assigned an IP address between this address and the end IP address.
End IPv6
Address Enter the end IP address. This address specifies the last of the contiguous
addresses in the IP address pool. Any new DHCPv6 client joining the LAN is
assigned an IP address between the start IP address and this IP address.
Prefix Length Enter the IPv6 prefix length, for example, 10 or 64.