Installation guide

WATERS NETWORK SYSTEMS™ ProSwitch
®
- 2600M, User’s Manual, 02/07 Page 48
6.19 IGMP
The IGMP function is used for IP multicast operation in the network. The 2600M perform
IGMP Snooping function to obtain the IP multicast group information from active IGMP
devices. The learned IP multicast member group will be shown in the IGMP web page.
The switch will forward IP multicast traffic to the member ports that it has learned from
group information.
Use this screen to enable/disable IGMP snooping. Click Apply to save the setting.
6.22 – IGMP Setting
6.20 Statistics
This screen is used to view the traffic statistics for the switch. Select the port number to
see the counters per port. Use the Refresh button to update the counter immediately. You
can reset the counters to zero with the Reset Statistics button.
6.23 – Statistics Screen