Installation guide

WATERS NETWORK SYSTEMS™ ProSwitch
®
- 2600M, User’s Manual, 02/07 Page 37
Figure 6.10 – 802.1Q VLAN Configuration
6.9 Static 802.1Q VLAN
To create an 802.1Q VLAN:
1. Enter the VLAN ID and VLAN Name in the fields under Create New Static VLAN.
2. Click Create. The valid VLAN ID is 1 ~ 4094.
3. Select the VLAN under Show Static VLAN Table.
4. The new VLAN is empty by default, so the next step is to select the ports. Select the
ports and mark them Untagged or Tagged.
5. Click Apply to complete the VLAN configuration.
To modify an 802.1Q VLAN:
1. Select the VLAN Show Static VLAN Table.
2. Make the appropriate modifications to the VLAN.
3. Click Apply to activate the new setting.
To delete an 802.1Q VLAN:
1. Select the VLAN under Show Static VLAN Table.
2. Click Delete to delete the 802.1Q VLAN.
Tagged/Untagged Settings