Installation guide

WATERS NETWORK SYSTEMS™ ProSwitch
®
- 2600M, User’s Manual, 02/07 Page 24
Command Description Syntax
negotiation disabled.
For most applications, Auto Detect
mode is OK. For 100FX connection,
you should select Auto Negotiation
mode and disable Auto. Set the port
to 100/Full.
cfg Displays model name, MAC ID, and
firmware version
show cfg
dot1x Displays current status for 802.1x
protocol
show dot1x config
Displays:
802.1x Protocol: Disabled
Re-authentication: Disabled
Re-authentication Timeout
Period: 3600
Re-authentication Max Count: 2
Max Request Count: 2
Server Timeout Period: 30
Supplicant Timeout Period: 30
Quiet Timeout Period: 60
Tx Timeout Period: 30
show dot1x radius
Displays:
Radius Server IP Address :
192.168.1.222
Radius Server Port Number: 1812
Shared Key: 12345678
show dot1x port
Displays:
Port Status Auth Mode
1 Yes FA
2 Yes FA
3 Yes FA
4 Yes FA
5 Yes FA
6 Yes FA
7 Yes FA
8 Yes FA
9 Yes FA
10 Yes FA
11 Yes FA
12 Yes FA
13 Yes FA
14 Yes FA
15 Yes FA
The Auth. Mode could be Auto,
FA (Forced Authenticated), FU
(Forced Unauthenticated) and No
(No 802.1x function).