Specifications

Waters Network Systems 2800M/MR User’s Manual Page 136
Command
Syntax
Description
Argument
Possible
Value
Set
set <ingress>
<egress>
Used to set the function of the
restricted group
<ingress>: ingress
group port; range
syntax: 1,5-7,
available from 0 to 26
<egress>: egress
group port; range
syntax: 1,5-7,
available from 0 to 26
set ingress or egress
to 0 as disabled
<ingress>: 0 to
26
<egress>: 0 to
26
Show
show
Used to display the restricted
group
None
None
SNMP
Disable
disable set-
ability
disable snmp
Disable used in this mode will
deactivate SNMP or set-
community
None
None
Enable enable set-
ability
enable snmp
Enable used in this mode will
activate SNMP or set-
community
None None
Set
set get-
community
<community>
set set-
community
<community>
set trap <#>
<ip> [port]
[community]
Set used in this mode is used to
set up get-community, set-
community, trap host IP, host
port and trap-community.
<#>: trap number
<ip>: IP address or
domain name
<port>: trap port
<community>:trap
community name
<#>: 1 to 6
<port>:1~6553
5
show
show
Used to display the
configuration of SNMP
None
None
STP
Mcheck
mcheck
<range>
Used to force the port to
transmit RST BPDUs
<range>: syntax 1, 5-
7, available form 1 to
26
<range>: 1 to
26
Disable
disable
Used to disable the STP
function
None
None
Enable
enable
Used to enable the STP
function
None
None
Set config
set config
<bridge
priority> <hello
time>
<max.age>
<forward
delay>
Used to set the parameters of
STP
<bridge priority>:
priority must be a
multiple of 4096,
available from 0 to
61440
<hello time>:
available from 1 to 10
<max.age> :
available from 6 to 40
<forward delay>:
available from 4 to
30. Note: 2*(Forward
bridge priority>:
0 to 61440
<hello time>: 1
to 10
<max.age> : 6
to 40
<forward
delay>: 4 to 30