Specifications

Waters Network Systems 2800M/MR User’s Manual Page 117
5.27 Reboot
There are a few ways to reboot the switch, including power up, hardware reset and software
reset. You can press the RESET button in the front panel to reset the switch. After upgrading
software, changing IP configuration or modifying VLAN configurations, you must reboot in order
for the new configuration to take effect.
Function name:
Reboot
Function description:
Reboot the switch. Reboot takes the same effect as the RESET button on the front panel of the
switch. It takes approximately 30 seconds to complete the system boot.
Parameter description:
Save and Reboot:
Save the current settings as start configuration before rebooting the switch.
Reboot:
Reboot the system directly.
Figure 5.77 – Reboot the System