Specifications

Waters Network Systems 2800M/MR User’s Manual Page 113
link partner. If the switch is not connected to active network devices, i.e. the ports are link down, the
switch will report the port numbers failed. If they all are working, OK is displayed.
Note: When you choose either of these tests, there will be interference with the normal system.
Packets that are being sent and received will stop temporarily.
Figure 5.72 – Loopback Test
Function name:
Ping Test
Function description:
Ping Test function is a tool for detecting whether or not the target device is making a connection
through the ICMP protocol which submits report messages. The switch provides Ping Test function to
let you know whether the target device is available or not. You can simply fill in a known IP address
and then click Ping. After a few seconds, the switch will report to the pinged device the result of the
Ping.
Parameter description:
IP Address:
An IP address with the version of v4, e.g. 192.168.1.1.
Default Gateway:
IP address of the default gateway.
For more details, please see the section of IP address in Section 4.