Installation guide

ProMedia-100 Manual Page 2
1.0 SPECIFICATIONS
1.1. Technical Specifications
Performance:
Data Rate: 100 Mbps
Half- or Full-Duplex, auto-sensing
800ns (80 bit-times) Path Delay Value (PDV) for conversion delay
Network Standards:
Fast Ethernet IEEE 802.3u: 100BASE-TX, 100BASE-FX
Operating Environment:
Ambient Temperature: 32ºF to 122ºF (0ºC to 50ºC)
Storage Temperature: -20ºC to 60ºC
Ambient Relative Humidity: 10% to 95% (non-condensing)
Maximum Standard Fast Ethernet Segment Lengths:
100BASE-TX (twisted pair): 100 m (328 ft)
100BASE-FX Fiber optic, half-duplex: (multimode) 412 m (1350 ft)
100BASE-FX Fiber optic, full duplex: (multimode) 2.0 km (6,562 ft)
100BASE-FX Fiber optic, half-duplex: (singlemode) 412 m (1350 ft)
100BASE-FX Fiber optic, full duplex: (singlemode) 18.0 km (49,215 ft)
Note:
ProMedia-100 media converters DO NOT support full length shared Fast Ethernet
segments. See Section 3.2 of this manual for media lengths and shared segment distance
calculations.
Power Supply (External):
Power Input: 95 - 125 vac at 60 Hz or 100 - 240 vac at 50-60 Hz for models which have IEC
power cable connector.
Power Consumption: 5 watts max. for the unit
Connectors:
RJ45 Port: Modular 8-Pin female, with “cross-over” up-link switch
Multimode:
Fiber Port, SC-type (snap-in): Fiber optic multimode, 100BASE-FX
Fiber Port, ST-type (twist-lock): Fiber optic multimode, 100BASE-FX
Singlemode:
Fiber Port, SC-type (snap-in): Fiber optic singlemode, 100BASE-FX
Packaging:
Enclosure: High strength sheet metal.
Dimensions: 3.0 in H x 3.5 in W x 1.0 in D (7.6 cm x 8.9 cm x 2.5 cm)
Power Supply: 2.0 in x 2.0 in x 1.5 in (5.1 cm x 5.1 cm x 3.8 cm)
Weight: 9.5 oz.(275 gr); Power Supply 16 oz (455 gr)
LED Indicators for the ProMedia-100:
LED
TX port FX port Description
PWR Indicates unit is receiving DC power.
LINK TP Fiber Steady ON when proper link is established at both ends of the media
segment, i.e., when both end’s connections are properly made and
when power is applied to the devices on both ends of the segment.
Agency Approvals:
115v 60 Hz power supply is UL Listed (UL 1310), CSA Certified
230v 50 Hz power supply is same, also TUV and GS approved
Emissions: Meets FCC Part 15 Class A, cUL, CE
Warranty: Five years, return to factory
Made in USA