Specifications

Waters Network Systems User’s Manual Page 46
PSX/MS1008-TX
3. Review spanning tree information about the Root Bridge from the following screen.
The following table describes the Spanning Tree parameters.
Parameter Description
Priority You can change the priority value which is a value used to
identify the root bridge. The bridge with the lowest value has
the highest priority and is selected as the root. Enter a
number 1 through 65535.
Max Age You can change Max Age value, which is the number of
seconds a bridge waits without receiving Spanning-Tree
Protocol configuration messages before attempting a
reconfiguration. Enter a number 6 through 40.
Hello Time You can change Hello time value which is the number of
seconds between the transmissions of Spanning-Tree
Protocol configuration messages. Enter a number 1
through 10.