Specifications

Waters Network Systems User’s Manual Page 33
PSX/MS1008-TX
NOTE: If you are using Win2000 with the Service Pack 2 function, the web
management function will be not be displayed correctly if the IE is below Version 5.5.
5.1 Accessing Management Functions through the Web
In order to use the management functions via your Web Browser, the following defaults
must be set. Use the Console connection to modify the IP for use with your web
browser.
 IP Address: 192.168.16.1
 Subnet Mask: 255.255.255.0
 Default Gateway: 192.168.16.254
 User Name: root
 Password: root
Once these settings have been made, access your Web Browser and type in:
http://192.168.16.1. Enter the user name and password.
5.2 Web Management Home Overview
The opening screen will provide a picture of the switch at the top of the screen and menu
options to the left of your screen.
5.3 Port Status
The Port Status menu provides the following information:
 State: Displays the port status (ON or OFF depending on the user’s setting).
Unlink will be treated as off.
 Link Status: Down is No Link. UP is Link.
 Auto Negotiation: Displays the auto negotiation mode. Is it set to auto
negotiate or is it hard set to a speed.
 Speed Status: Current status of port
 Duplex Status: Display full-duplex or half-duplex mode.
 Flow Control: Displays the Flow Control current setting.
 Config: Displays the state of user setting.
 Atual: Displays the negotiation result.