Specifications

Waters Network Systems User’s Manual Page 30
PSX/MS1008-TX
The valid range is 1~255 ms.
4.25 Protocol Related Configuration
The Protocol Related Configuration is accessed from the Main Menu. The following
functions can be set in the Protocol Related Configuration menu:
 STP – Disabled by default. Once STP has been enabled, you will be able to set the
system configuration and perport configuration.
 SNMP
 GVRP – Disabled by default.
 LACP
4.26 Perport Configuration
 PortState – Use this option to view the spanning tree status per port.
 PathCost – Use PathCost to specify the path cost of the port that the switch is using
to determine the forwarding ports. If you change the value, the switch must be
rebooted for the new value to take effect.
 Priority – Use this option to set port priority; you can make it more or less likely to
become the root port. If you change the value, the switch must be rebooted to use
the new value.
4.27 SNMP
The SNMP Menu is used to define management stations as trap managers and to enter
SNMP community strings. Use this menu to define a name, location, and contact
person for the switch.