Specifications

Waters Network Systems User’s Manual Page 25
PSX/MS1008-TX
These options represent the number of high priority packets sent before one low priority
packet is sent. For example, 2 High: 1 Low means that the switch sends two high
priority packets before sending one low priority packet.
Note: Remember to save settings.
4.18 MAC Address Configuration
When you add a static MAC address, it remains in the switch's address table, regardless
of whether the device is physically connected to the switch. This saves the switch from
having to re-learn a device's MAC address when the device is active again on the
network. User can add / modify / delete a static MAC address.
Add static MAC address
1. Select Add to add a static MAC address.
2. Enter the MAC address of the desired port. This port will be set to permanently
forward traffic, regardless of the device’s network activity.
3. Enter the port number under Port num.
4. If tag-based VLANs are set up on the switch, static addresses are associated with