Specifications

Waters Network Systems User’s Manual Page 12
PSX/MS1008-TX
3.5 LED Indicators
Figure 3-7. LED Indicators for 1008-TX switch
There are three LED-Indicators (100M, LK/ACT, FDX/COL) for each of the eight
10/100Base-TX copper ports. The following table provides the status and description of
the LEDs. The LEDs provide a real-time indication of systematic operation status.
Ethernet Port
LED Status Color Description
Power
On Green Power On
On Green
The port is operating at the speed of
100Mbps
100M
Off In 10Mbps mode or no device is attached
On Green
The port is successfully connecting with the
device
Blinks Green The port is receiving or transmitting data
LNK/
ACT
Off No device is attached
On Orange The port is operating in full-duplex mode
Blinks Orange Collision of packets occurs in the port
FDX/
COL
Off Half-duplex mode or no device is attached.
Table 3-1. LED Description
3.6 Desktop Installation
Choose a surface for your switch that is clean, smooth, level, sturdy and with a power
outlet nearby. Make sure there is enough clearance around the switch to allow