Specifications

Waters Network Systems GSM2109/GSM1009-SFP User’s Manual Page 82
 IEEE 802.1x protocol - enable or disable 802.1x protocol.
 Radius Server IP - set the Radius Server IP address.
 Server Port - set the UDP destination port for authentication requests to the specified
Radius Server.
 Accounting Port - set the UDP destination port for accounting requests to the
specified Radius Server.
 Shared Key - set an encryption key to be used during authentication sessions with
the specified radius server. This key must match the encryption key used on the
Radius Server.
 NAS, Identifier - set the identifier for the radius client.
 Click Apply to save the configuration.
5.35 – 802.1x System Configuration
The 802.1x authentication state can be configured for each port. The State provides the
following conditions. Use the Space bar to change the state value.
 Reject - the specified port is required to be held in the unauthorized state.
 Accept - the specified port is required to be held in the authorized state.
 Authorized - the specified port is set to the authorized or unauthorized state in
accordance with the outcome of an authentication exchange between the supplicant
and the authentication server.