Specifications

Waters Network Systems GSM2109/GSM1009-SFP User’s Manual Page 61
Figure 5.18 – Port Trunk Aggregator Setting
Once the LACP aggregator has been configured, the information can be displayed
through the Aggregator Information screen.
Note: The trunk function does not support GVRP and X-Ring.
5.19 - Aggregator Information screen
5.20 State Activity
Once the LACP aggregator has been configured, you can configure the port state activity.
Port state activity can be set to active or passive.
 Active – port automatically sends LACP protocol packets
 Passive – port does not automatically send LACP protocol packets and responds
only if it receives LACP protocol packets from the opposite device.
Note: A link having either two active LACP ports or one active port can perform