Specifications

Waters Network Systems GSM2109/GSM1009-SFP User’s Manual Page 38
The following table lists the TFTP Commands.
Command Level Description Example
backup
flash:backup_
cfg
G Save configuration to TFTP
server. Must specify the IP
address of the TFTP server
and the file name.
switch(config)#backup
flash:backup_cfg
restore
flash:restore_
cfg
G Upload configuration from
TFTP server. Must specify
the IP address of the TFTP
server and the file name.
switch(config)#restore
flash:restore_cfg
upgrade
flash:upgrade_
fw
G Upgrade firmware from the
TFTP server. Must specify
the IP address of TFTP server
and the file name.
switch(config)#upgrade
lash:upgrade_fw
The following table lists the SystemLog, SMTP and Events Commands.
Command Level Description Example
systemlog ip
[IP address]
G Set IP address of system log
server
switch(config)#systemlog ip
192.168.1.100
systemlog
mode
[client|server|bo
th]
G Specify the log mode switch(config)#systemlog
mode both
show
systemlog
E Display system log Switch>show systemlog
show
systemlog
P Display system log, client and
server information
switch#show systemlog
no systemlog G Disable system log function switch(config)#no systemlog
smtp enable G Enable SMTP function switch(config)#smtp enable
smtp serverip
[IP address]
G Configure SMTP server IP switch(config)#smtp
serverip 192.168.1.5
smtp
authentication
G Enable SMTP authentication switch(config)#smtp
authentication
smtp account
[account]
G Configure authentication
account
switch(config)#smtp account
user
smtp password
[password]
G Configure authentication
password
switch(config)#smtp
password
smtp rcptemail G Configure e-mail address for switch(config)#smtp