Specifications

Waters Network Systems GSM2109/GSM1009-SFP User’s Manual Page 33
Command Level Description Example
no mac-
address-table
filter hwaddr
[MAC]
G Remove filter entry of MAC
address table
switch(config)#no
mac-address-table filter
hwaddr 000012348678
no mac-
address-table
G Remove dynamic entry of
MAC address table
switch(config)#no
mac-address-table
The following table lists SNMP Commands.
Command Level Description Example
snmp
system-name
[System Name]
G Set SNMP agent system
name
switch(config)#snmp
system-name l2switch
snmp
system-location
[System
Location]
G Set SNMP agent system
location
switch(config)#snmp
system-location lab
snmp system-
contact
[System
Contact]
G Set SNMP agent system
contact
switch(config)#snmp
system-contact where
snmp
agent-mode
[v1v2c|v3|v1v2
cv3]
G Select the agent mode of
SNMP
switch(config)#snmp
agent-mode v1v2cv3
snmp
community-
strings
[Community]
right
[RO/RW]
G Enter the SNMP community
string.
switch(config)#snmp
community-strings public
right rw
snmp-server
host
[IP address]
community
[Community-
string]
trap-version
[v1|v2c]
G Configure SNMP server host
and community string
switch(config)#snmp-server
host 192.168.1.50
community public
trap-version v1
(remove)
Switch(config)#
no snmp-server host
192.168.1.50
snmpv3
context-name
[Context
G Configure the context name switch(config)#snmpv3
context-name Test