Specifications

Waters Network Systems GSM2109/GSM1009-SFP User’s Manual Page 21
The following table lists the System Commands.
Command Level Description Example
show config E Displays switch configuration switch>show config
show terminal P Displays console information switch>show terminal
menu E Enters menu mode switch>menu
write memory G Saves user configuration into
permanent memory (flash
ROM)
switch#write memory
system name
[system
name}
G Configure the system name switch (config)# system
name xxx
system
location
[system
location]
G
Configure switch location switch(config)#system
location xxx
system
description
[system
description]
G
Set switch system description
string
switch(config)#system
description xxx
system
contact
[system
contact]
G
Set switch system contact
window string
switch(config)#system
contact xxx
show
system-info
E
Show system information switch>show system-info
ip address]
[Ip-address]
[Subnet-mask]
[Gateway]
G
Configure the IP address of
switch
switch(config)#ip address
192.168.1.1 255.255.255.0
192.168.1.254
ip dhcp
G
Enable DHCP client function
of switch
switch(config)#ip dhcp
show ip
P
Show IP information of switch switch#show ip
no ip dhcp
G
Disable DHCP client function
of switch
switch(config)#no ip dhcp