Specifications

Waters Network Systems GSM2109/GSM1009-SFP User’s Manual Page 16
switch via a direct connection to the RS-232 console port. This port is a female DB-9
connector. You will have access to all of the management functions of the switch from
the console connection.
Connecting a Terminal or PC to the Console Port
Use the supplied RS-232 cable to connect a terminal or PC to the console port. The
terminal or PC to be connected must support the terminal emulation program.
After the connection between switch and PC is made, run a terminal emulation
program or Hyper Terminal to match the following default characteristics of the console
port:
Baud Rate: 9600 bps
Data Bits: 8
Parity: None
Stop Bit: 1
Flow Control: None
Figure 4.1 - Communication Parameters