Specifications

Waters Network Systems MS1008-2G-4POE/PSX1008-2G-4PoE User’s Manual Page 93
Command Level Description Example
[Start time]
[End time]
disabled, this command can’t
be applied.
Parameter format:
[yyyymmdd-hh:mm]
20060101-01:01
20060202-01-01
sntp
daylight-offset
[Minute]
G Set offset of daylight saving
time. If SNTP function is
disabled, this command can’t
be applied.
switch(config)#sntp
daylight-offset 3
sntp ip
[IP]
G Set SNTP server IP. If SNTP
function is disabled, this
command can’t be applied.
switch(config)#sntp ip
192.169.1.1
sntp timezone
[Timezone]
G Set timezone index, use the
show sntp timzezone
command to obtain more
information of the index
number
switch(config)#sntp
timezone 22
show sntp P Displays SNTP information switch#show sntp
show sntp
timezone
P Displays index number of time
zone list
switch#show sntp timezone
no sntp G Disable SNTP function switch(config)#no sntp
no sntp daylight G Disable daylight savings time switch(config)#no sntp
daylight
The following table lists the X-Ring Commands.
Command Level Description Example
X - ring enable G Enable X-ring switch(config)#Xring enable
X - ring master G Enable ring master switch(config)#Xring master
X - ring
couplering
G Enable couple ring switch(config)#Xring
couplering
X - ring
dualhoming
G Enable dual homing switch(config)#Xring
dualhoming
X - ring ringport
[1st Ring Port]
[2nd Ring Port]
G Configure first and second
ring port
switch(config)#Xring
ringport 7 8
X - ring
couplingport
[Coupling Port]
G Configure coupling port switch(config)#Xring
couplingport 1
X - ring
controlport
G Configure control port switch(config)#Xring
controlport 2