Specifications

Waters Network Systems MS1008-2G-4POE/PSX1008-2G-4PoE User’s Manual Page 91
The following table lists the SystemLog, SMTP and Events Commands.
Command Level Description Example
systemlog ip
[IP address]
G Set IP address of system log
server
switch(config)#systemlog ip
192.168.1.100
systemlog
mode
[client|server|bo
th]
G Specify the log mode switch(config)#systemlog
mode both
show
systemlog
E Display system log Switch>show systemlog
show
systemlog
P Display system log, client and
server information
switch#show systemlog
no systemlog G Disable system log function switch(config)#no systemlog
smtp enable G Enable SMTP function switch(config)#smtp enable
smtp serverip
[IP address]
G Configure SMTP server IP switch(config)#smtp
serverip 192.168.1.5
smtp
authentication
G Enable SMTP authentication switch(config)#smtp
authentication
smtp account
[account]
G Configure authentication
account
switch(config)#smtp account
user
smtp password
[password]
G Configure authentication
password
switch(config)#smtp
password
smtp rcptemail
[Index] [Email
address]
G Configure e-mail address for
receipt of alerts
switch(config)#smtp
rcptemail 1 [e-mail]
show smtp P Display SMTP information switch#show smtp
no smtp G Disable SMTP function switch(config)#no smtp
event
device-cold-
start
[Systemlog|SM
TP|Both]
G Set cold start event type switch(config)#event
device-cold-start both
event
authentication-
failure
[Systemlog|
SMTP|Both]
G Set authentication failure
event type
switch(config)#event
authentication-failure both
event X -
-ring-topology-
change
G Set X-ring topology event type switch(config)#event X -
-ring-topology-change both